Technical data

4
4-7 Fiery X3 on a NetWare 3.x, 4.x, or 5.x network
Configuring a NetWare server for printing
The following sections explain how to set up a NetWare file server so that networked
users can print to the Fiery X3 from their workstations, and the Fiery X3 can obtain
print jobs from the NetWare server.
For each NetWare file server that you configure, follow these general steps. More detail
is provided in subsequent sections and in your NetWare documentation.
•Make sure the server is connected to a functioning IPX network.
• Log in as the Supervisor on a PC connected to the NetWare file server.
•For NetWare 4.x installations, set up an NDS connection (see page 4-9).
•For NetWare 4.x in emulation mode, set the bindery context (see page 4-9).
•For NetWare 3.x and for NetWare 4.x in bindery emulation, set up a file server, a
print server, and a print queue for the Fiery X3 (see page 4-10).
With bindery services, you can route all Fiery X3 print jobs through the same NetWare
file server, or you can configure more than one file server to handle Fiery X3 jobs.
The functions you perform on the Novell server, on the Fiery X3, and on the client
workstation are summarized in the following tables. The first table applies to NDS
connections, the second to bindery connections. Complete the operations in the left
column, then the center column, then the right column.