Technical data

4
4-3 Fiery X3 on a NetWare 5.x network with NDPS
In Fiery X3 Setup, make sure you have enabled TCP/IP (page 2-15) and LPD printing
(page 2-22) on the Fiery X3. You can ping the Fiery X3 (page 4-20) to verify that
TCP/IP communication is successful.
Setting up the Fiery X3 on a NetWare 5.x network
Depending on the security needs at your organization, you can set up the Fiery X3 as a
Public Access printer or a Controlled Access printer. The following procedure describes
setting up a Public Access printer. You can then convert this type of printer to
Controlled Access if necessary. For more information, see your NetWare
documentation.
NOTE: In the following procedure, “Atlas” is an example of an NDPS Manager name;
“Aero” is an example of a Printer Agent name.
TO SET UP THE FIERY X3 AS A PUBLIC ACCESS PRINTER:
1. In NetWare Administrator, double-click the NDPS Manager object you have created.
2. In the Details window for the NDPS Manager object, click the Printer Agent List
button.
The list of Printer Agents appears.
3. Click New.
The Create Printer Agent dialog box appears.
4. In the Printer Agent (PA) Name field, enter a name.
5. Under Gateway Types, select Novell Printer Gateway, and click OK.