Technical data

51 Using the software for the first time
Repeat step 3 for each IP address range you would like to search. To remove an IP
address range from the list, select the range in the IP Range/Subnet Addr. window and
click the Remove button.
You can also search for the server using a range of subnet values. For more information,
see “To configure the connection for Fiery Link using an advanced subnet search:” on
page 53.
4. Click Search.
When the search is complete, all servers found appear in the Available Fierys area of the
dialog box.
If the Fiery was not found, and you would like to search again using the same
parameters, click Refresh.
NOTE: Only servers that support Fiery Link appear in the Available Fierys area.