Technical data

xviii Introduction
UNIX (TCP/IP)
To print to the Fiery with a UNIX workstation, you need:
• A workstation with standard TCP/IP connectivity (for example, Sun SPARCStation
or Silicon Graphics workstation with Solaris version 2.x or 7.x, or SunOS version
4.1.x software)
• TCP/IP printing software that conforms to RFC1179 (Berkeley lpd protocol)
Parallel port
To print to the Fiery using the parallel port, you need:
• A Windows computer with an 80486, AMD, or Pentium processor
• At least 16MB of RAM
• The parallel cable included with the Fiery
The cable has a DB-25 male connector (that connects to the computer) on one end
and a DB-25 female connector (that connects to the Fiery) on the other.
IPX (Novell)
To use the Fiery with an IPX (Novell) network, you need:
• A Novell server
• Novell NetWare software version 3.x or 4.x
• Support for Ethernet SNAP, Ethernet II, Ethernet 802.3, Ethernet 802.2,
Token Ring SNAP, or Token Ring