Technical data

101 Setting up Fiery WebTools
Fiery WebTools allow you to manage your Fiery remotely from the Internet or your
company’s intranet. The Fiery has its own home page, from which you can select from
a variety of functions, including Status, WebSpooler, WebLink, Installer,
WebDownloader, and WebSetup.
NOTE: WebSetup is not supported on Mac OS.
For more information on using Fiery WebTools, see the Printing Guide and the Job
Management Guide.
Setting up Fiery WebTools
In order for network users to access and use Fiery WebTools, you need to set certain
Fiery options in Network Setup and Printer Setup. You also need to prepare each user’s
workstation to communicate with the Fiery over the Internet or intranet.
For more information about Network Setup, see the Configuration Guide.
TO SET UP FIERY WEBTOOLS ON THE FIERY:
1. Set Enable Ethernet to Yes in Network Setup>Port Setup>Ethernet Port Setup.
2. Set Enable TCP/IP for Ethernet to Yes in Network Setup>TCP/IP Ethernet Setup.
3. Set Enable Web Services to Yes in Network Setup>Network Service Setup>Web Services
Setup.
4. Exit Network Setup and choose OK to Save Changes.
5. Exit Printer Setup and choose OK to Save Changes.
TO SET UP CLIENT WORKSTATIONS TO USE FIERY WEBTOOLS:
1. Enable TCP/IP networking.
2. Make sure the workstation has a valid, unique IP address.
Downloading
Installers with
Fiery WebTools