System information

Back up Fiery Server settings from Command WorkStation
From Command WorkStation, you can choose which Fiery Server settings you want to back up.
1
Connect to the desired Fiery Server and do one of the following:
• Click Device Center > General > Tools > Backup & Restore.
• Select Server > Backup & Restore.
2
Click Backup.
3
Select the items you want to back up.
4
In the dialog box that appears, select a location to save the file and specify a name for the backup file.
5
(Optional) Select Add date to file name.
6
Click Next, and then click Finish.
Restore Fiery Server settings from Configure
If you previously backed up Fiery Server settings, you can restore them from Configure.
Important: There are two versions of Configure and they are specific to the Fiery Server you are connected to. This
is a combined procedure that describes what to do when connected to a Fiery Server with FS100/100Pro or earlier,
and notes about what to do with FS150/150 Pro or later. If you are not sure which version of Configure you are
using, see Which version of Configure am I using? on page 27.
1
From Configure, choose Server > Backup/Restore and click Restore.
Note: If you are connected to a Fiery Server with FS150/150Pro, choose Fiery Server > Restore instead.
2
Follow the on-screen instructions to restore your settings.
Restore Fiery server default settings from Configure
After you restore default settings from Configure, the Fiery Server must reboot to revert to them.
1
From Configure (Device Center > General > Configure), choose Server > Backup/Restore.
2
Click Restore Default Fiery Settings.
Restore Fiery server settings from Command WorkStation
If you previously backed up Fiery Server settings, you can restore them from Command WorkStation.
1
Connect to the desired Fiery Server and do one of the following:
• Click Device Center > General > Tools > Backup & Restore.
• Select Server > Backup & Restore.
2
Click Restore.
3
In the dialog box that appears, browse to the location of the configuration settings you want to restore and click
Open or select a recent backup.
Fiery Command WorkStation
Configuring server settings
72