System information

System Update can notify you when updates are available. Notification is provided on the Fiery Server Control Panel

and the monitor connected to the Fiery Server (if supported).

From Configure, choose Server > System Update.

Note: If you are connected to a Fiery Server with FS150/150Pro, you can find settings mentiond in the procedure

in Fiery Server > System Updates instead.

Select Enable System Updates.

Specify when the Fiery Server should contact the update server.

If supported, choose a method for updating the Fiery Server operating software (Operating System Updates),

system software (Fiery System Updates), and utility software (Fiery Application Updates):

• Automatically download and install updates - Automatically downloads and installs updates on the

Fiery Server. Your intervention is not required unless a particular update requires the Fiery Server to reboot.

• Download updates and send notification - Automatically downloads updates to the Fiery Server. You

must then install the updates.

• Send notification when updates are available - Displays a message on the Fiery Server when new

updates are available. You must retrieve and install the updates.

Note: The above three options may not be available for the Fiery Server.

If you use a proxy server to connect through a firewall to the Update server, click Proxy Settings, select Enable

Proxy, and type the appropriate information in the following fields:

Note: If you are connected to a Fiery Server with FS150/150Pro, click the HTTP Proxy Settings link instead

and then provide the required information about the proxy server.

• Address - Proxy server IP address

• Port - Port used by the proxy server

• User Name - User name for accessing the proxy server

• Password - Password for accessing the proxy server

Save the proxy settings you supplied.

Apply or save your changes.

Network setup

Use Network pages to specify the active network systems that transmit print jobs to the Fiery Server.

Enter network addresses and names to be used by computers, servers, and the Fiery Server when they communicate

with each other. Make sure that the Fiery Server is connected to a functioning network so that it can query the

network for the appropriate information.

Fiery Command WorkStation

Configuring server settings