System information
Configure Administrator and Operator passwords (FS100/100Pro)
You can set the default Administrator and Operator passwords. By default, the Administrator password is set on the
Fiery Server, but the Operator password is not. Change the Administrator password to protect the Fiery Server from
unauthorized changes.
Important: If you are connected to a Fiery Server with FS100/100 Pro or earlier, use this procedure. If you are not
sure about which version of Configure you are using, see Which version of Configure am I using? on page 27. An
alternative procedure about what to do with FS150/150Pro is available.
Note: Keep track of the passwords that you set.
For more information about passwords, see Configuration and Setup, which is part of the user documentation set.
1
From Configure, choose Server > Password.
2
Do any of the following:
• In the Administrator or Operator section, type the new password in the Enter New Password and Verify New
Password fields.
Note: Passwords are case-sensitive.
• To remove the Operator password, place the cursor in each field for that password without typing anything.
3
Click Apply.
Configure Administrator and Operator passwords (FS150/150Pro)
You can set the default Administrator and Operator passwords. By default, the Administrator password is set on the
Fiery Server, but the Operator password is not. Change the Administrator password to protect the Fiery Server from
unauthorized changes.
Important: If you are connected to a Fiery Server with FS150/150 Pro or later, use this procedure. If you are not
sure about which version of Configure you are using, see Which version of Configure am I using? on page 27. An
alternative procedure about what to do with FS100/100Pro is available.
Note: Keep track of the passwords that you set.
For more information about passwords, see Configuration and Setup, which is part of the user documentation set.
1
From Configure, choose Security.
2
Choose one of the following:
• Adminstrator Password
• Operator Password
3
Enter and confirm a new password. Click Save.
Fiery Command WorkStation
Configuring server settings
43