System information

9
Job Mismatch enables users to specify how to handle jobs that cannot print because of missing media.
Note: If you are connected to a Fiery Server with FS150/150Pro, you can find this setting in Job
Management > Job Mismatch instead.
10
Apply or save your changes.
Process jobs with missing media (FS100/100Pro)
If a job lacks the media originally specified, you can define how the Fiery Server handles that job. You can send the
job to the Hold queue and define whether to cancel subsequent processing of the job or suspend the processing.
Important: If you are connected to a Fiery Server with FS100/100 Pro or earlier, use this procedure. If you are not
sure about which version of Configure you are using, see Which version of Configure am I using? on page 27. An
alternative procedure about what to do with FS150/150Pro is available.
1
If the Jobs page is not active, from Configure choose Server > Jobs.
2
To cancel processing of a job and send it to the Hold queue, select Enable Mismatch Action.
3
From the Mismatch Action list, choose Suspend or Cancel.
If you choose Suspend, other jobs that do not have errors continue to process and print.
4
In the Timeout field, specify the amount of time the Fiery Server waits before it suspends or cancels the
processing of a job and sends it to the Hold queue.
5
If you specified Suspend for Mismatch Action, you can select Cancel Job Processing after timeout expires.
6
Click Apply.
Process jobs with missing media (FS150/150Pro)
If a job lacks the media originally specified, you can define how the Fiery Server handles that job. You can send the
job to the Hold queue and define whether to cancel subsequent processing of the job or suspend the processing.
Important: If you are connected to a Fiery Server with FS150/150 Pro or later, use this procedure. If you are not
sure about which version of Configure you are using, see Which version of Configure am I using? on page 27. An
alternative procedure about what to do with FS100/100Pro is available.
1
If the Jobs page is not active, from Configure choose Fiery Server > Job Management > Job Mismatch.
2
To cancel processing of a job and send it to the Hold queue, select Enable Job Mismatch and set Mismatch
Action to one of the following:
• Suspend - Other jobs that do not have errors continue to process and print.
• Cancel - Cancel processing of a job and send it to the Hold queue
3
In the Timeout field, specify the amount of time the Fiery Server waits before it suspends or cancels the
processing of a job and sends it to the Hold queue.
4
If you specified Suspend for Mismatch Action, you can select Cancel job processing after time out expires
5
Click Save.
Fiery Command WorkStation
Configuring server settings
42