System information

Configure date and time automatically (FS150/150Pro)

You can use an automatic date and time mechanism by selecting a time server and a polling interval.

Important: If you are connected to a Fiery Server with FS150/150 Pro or later, use this procedure. If you are not

sure about which version of Configure you are using, see Which version of Configure am I using? on page 27. An

alternative procedure about what to do with FS100/100Pro is available.

From Configure, choose Fiery Server > Regional Settings.

Select Set Time and Date Automatically and then select click the Manage link.

Select a time server and polling interval.

The polling interval determines how frequently the Fiery Server receives updates from the time server.

Set job options

You can configure settings for options that affect all jobs, such as whether to enable the Printed queue.

Important: There are two versions of Configure and they are specific to the Fiery Server you are connected to. This

is a combined procedure that describes what to do when connected to a Fiery Server with FS100/100Pro or earlier,

and notes about what to do with FS150/150 Pro or later. If you are not sure which version of Configure you are

using, see Which version of Configure am I using? on page 27.

From Configure, choose Server > Jobs.

Select or clear Enable Printed Queue.

Note: If you are connected to a Fiery Server with FS150/150Pro, you can find this setting in Job

Management > Printed Queue instead. Select Save printed jobs.

If this option is enabled, you can reprint jobs from the Printed queue without resending them to the Fiery Server.

If this option is not enabled, jobs are deleted from the Fiery Server hard disk after they are printed.

In the Jobs Saved in Printed Queue field, type the number of jobs you want to be saved in the Printed queue.

Note: This option is available only if you enable the Printed queue. Be aware that jobs saved in the Printed queue

occupy space on the Fiery Server hard disk.

To print a start page when the Fiery Server is turned on or restarted, select Print Start Page.

Note: If you are connected to a Fiery Server with FS150/150Pro, you can find this setting in Fiery Server

instead. Select the Print Start Page check box.

The start page lists the Fiery Server, the current date and time, the amount of memory installed, the network

protocols enabled, and the print connections published.

To display a preview thumbnail of a job in Command WorkStation while it is being processed, select Preview

While Processing.

Note: If you are connected to a Fiery Server with FS150/150Pro, you can find this setting in Job Management

instead. Select the Preview while processing check box.

If you do not enable this option, users can see a preview by processing and holding the job. Also, users with

Impose can preview a held job that has not been processed.

Note: Selecting this option may slow Fiery Server processing time.

Fiery Command WorkStation

Configuring server settings