System information

5
Do one of the following:
• To create the group without adding users, click Save.
• To add users to the group, click Save and Add Users.
If you choose Save and Add Users, the Assign User dialog box displays.
6
In the Assign User dialog box, add or remove users from one of the following: the Fiery Contact List or Global
Address List.
• Fiery Contact List - Contains users that you have already created.
• Global Address List - LDAP must be configured and enabled. Contains names from your organization's
corporate database.
Groups created in Configure that share domain groups obtained from the corporate server via LDAP are updated
dynamically. This is useful because the Fiery Server automatically verifies changes (such as additional group
members) in the LDAP domain groups and updates the Fiery Server group.
Add users to existing groups (FS100/100Pro)
You can add existing users to an existing group, or you can create users and add them to the existing group. You can
add users to as many groups as you want.
Important: If you are connected to a Fiery Server with FS100/100 Pro or earlier, use this procedure. If you are not
sure about which version of Configure you are using, see Which version of Configure am I using? on page 27. An
alternative procedure about what to do with FS150/150Pro is available.
Creating a user, even with the required password and user name, does not assign any privileges to that user until you
add the user to a group. If you selected the Allow users to print without authentication check box, a user that is not
in a group can print but does not have any other privileges until the user is added to a group.
1
From Configure, select Users and Groups.
2
Select the group to which you want to add users and click View Detail.
3
In the Group Membership section, click Add.
4
In the Show contacts from list, choose the source of users.
Global Address List (if LDAP is configured and enabled) contains names from your organization's corporate
database. Contact List contains users that you have already created.
5
Select the name from the Available Contacts list and click Add.
The user appears in the Members list on the right.
6
To search for a name in the Available contacts list, type all or the first part of the name in the Search field and
click Go.
7
To return to the full list of Available contacts, click Reset.
8
If the name you want to add does not exist, click Add New, type the appropriate information in the Add New
Contact window, and then click Save.
9
To save your changes, click Save in the Add Member window.
10
In the View Group Detail window, click Close.
Fiery Command WorkStation
Configuring server settings
32