System information
2
Click Contact List.
You can define a password when you create a new user. Follow your organization’s guidelines for the minimum
length of the password and for the frequency with which it must be changed.
3
Click Add.
4
Type the appropriate information in the fields, and click Save.
Note: To create several users in succession, click Save and Add.
Create new users (FS150/150Pro)
If users are not in the global address list or contact list, you can create them manually. Any name that appears in the
contact list can become a user that you assign to a group.
Important: If you are connected to a Fiery Server with FS150/150 Pro or later, use this procedure. If you are not
sure about which version of Configure you are using, see Which version of Configure am I using? on page 27. An
alternative procedure about what to do with FS100/100Pro is available.
The Administrators and Operators groups have a default user named "admin" or "operator," respectively.
1
From Configure, select User Accounts.
2
Click the Fiery Contact List button.
3
In the Fiery Contact List dialog box, click the Add User button.
4
In the Create User dialog box, specify the required information. Click Create.
5
Click Close.
Create groups (FS100/100Pro)
When you create a group, you define its privileges. You can add new or existing users to the group when you create
it, or you can create a group without adding users and then add them later.
Before you begin
Important: If you are connected to a Fiery Server with FS100/100 Pro or earlier, use this procedure. If you are not
sure about which version of Configure you are using, see Which version of Configure am I using? on page 27. An
alternative procedure about what to do with FS150/150Pro is available.
To add users from your organization's global address list, you must first enable LDAP services on the Fiery Server.
1
From Configure, select Users and Groups.
The current list of groups is displayed, including several default groups.
Fiery Command WorkStation
Configuring server settings
29