System information

spooled/held Jobs are spooled and held on the Fiery Server in preparation for job
management by the operator. After the operator assigns a destination, the
job is spooled for processing.
spooling The job, a file sent for printing, is saved on the Fiery Server hard disk. The
file may arrive in packets from the network, or be loaded from a disk. Jobs
appear in the queue in the order they arrive, and generally move through the
print workflow in the same order unless an operator intervenes. If a job's
movement is suspended, it is held in the spool queue pending further
instruction. For this reason, the spool queue may also be known as the Hold
queue.
top edge Specifies binding across the top of the booklet.
trim marks A solid line that defines the location of a cut.
Fiery Command WorkStation
Booklet Maker
252