System information

Print Options/Command WorkStation Job Properties
•
Variable Data Printing is not supported with Booklet Maker.
•
Mixed Media is not supported with Booklet Maker.
•
The Remove White PPT Background print option (designed for use with PowerPoint documents) is not
supported with Booklet Maker.
Booklet Maker glossary
These terms relate to the booklet-making process.
2-up imposition Prints two document pages on each side of a single sheet of paper.
Administrator Has full access to all Command WorkStation and Fiery Server control panel
functions. Administrator password is required.
Alignment Alignment controls allow you to specify the placement of a page within its
predefined slot on the sheet. For example, if a page has been scaled smaller
than the slot, you can align the page to the top-left corner of the slot by
clicking the control that corresponds to that position.
aspect ratio Relationship of width to height. In general, portrait equals a width less than
(<) the height. Landscape equals a width greater than (>) the height.
Back Color Profile Choose the default color profile that will be applied only to the back side of
your media. This attribute can be overridden by specifying a different color
profile in Job Properties.
bleed Extension of the content beyond a trim mark, used to ensure that the
printed area extends to the very edge of a trimmed page.
clipping indicators Appear when specified scaling values will cause the page to print beyond the
edge of the sheet. When the window is in Layout mode, any clipped page
edge is highlighted in yellow. When the window is in Preview mode, the
Clipping icon appears to the left of the Scale Factor field. Also, the page
preview shows content truncating at the edge of the sheet.
creep Creep, or binder's creep, is the shift of the content area caused by the
incremental fold of signatures in Saddle and Nested Saddle binding.
creep adjustment Compensates automatically for binder's creep when saddle-stitched binding
is specified.
Creep Adjustment menu The Creep Adjustment menu is used to compensate automatically for
binder's creep when saddle-stitched binding is specified.
Custom Custom enables the Scale Factor and Finished Height and Width fields, so
that you can specify new scaling values. The original height and width values
are displayed for reference. When you specify a value, Impose automatically
updates the other fields to preserve the height-to-width aspect ratio of the
page.
duplex Printing on both sides of the sheet.
edge feed The side of the paper that first enters the copier/printer.
finisher Any device designed for the after-printing process, such as folding, stapling,
or binding.
finishing Any after-printing process, such as folding, stapling, or binding.
Fit Height Scales page(s) to fill the height of each page slot on the sheet.
Fiery Command WorkStation
Booklet Maker
249