System information

Note: Changes are not effective until the next time Command WorkStation is started.
Next steps
Preview a booklet
You can preview a booklet in the Preview or Raster Preview window.
Note: It is not possible to preview jobs when working with Booklet Maker in the printer driver.
•
In the Command WorkStation Held list in Job Center, select your print job and select Actions > Preview.
• If the job is spooled and held, the job is displayed in the Preview window.
• If the job is processed and held, the job is displayed in the Raster Preview window.
Booklet workflow examples
The Booklet Maker workflow examples provide an overview of the steps to create the three standard types of booklet
using the wizard: Perfect, Saddle, and Nested Saddle.
•
Print a Perfect booklet on page 247
•
Print a Saddle booklet on page 247
•
Print a Nested Saddle booklet on page 248
Print a Perfect booklet
You can use a wizard to print a Perfect booklet.
1
Access Booklet Maker from the printer driver or Command WorkStation Job Properties.
2
Click Launch Wizard.
3
Select the Booklet Type and Binding edge, and then click Next.
4
Select the Paper Size, and then click Next.
5
Set the page alignment and gutter value (optional) and click Next.
6
Review the settings summary to confirm your booklet settings and click Finish to return to the Layout >
Booklet tab in the printer driver or Command WorkStation Job Properties.
7
Set other print options (optional) and finishing options (such as folding, stapling, or binding) in the printer driver
or Command WorkStation Job Properties, and then click OK.
Print a Saddle booklet
You can use a wizard to print a Saddle booklet.
1
Access Booklet Maker from the printer driver or Command WorkStation Job Properties.
2
Click Launch Wizard.
Fiery Command WorkStation
Booklet Maker
247