System information
View the layout of a job as sheets
When you view the job as sheets, the order of sheets is the primary focus.
•
To view a job as sheets, click the Sheets tab at the top of the viewer.
The thumbnails in the top row represent the actual print order on the printercopier/printer. The second row shows
which pages will be printed on which sheets. For example, in the following illustration, the cover sheet includes the
content of the first two pages of the document as the front cover, the content of the third last page as the spine, and
the content of the last two pages of the document as the back cover.
Note: The cover is always displayed first, even if the cover is output as the last sheet on certain printers.
Booklet Maker Mixed Media limitations
The following actions cannot be done in Mixed Media for 1-up perfect binding.
•
Inserting pages before, between, or after the document pages whose content is allocated for the cover.
•
Inserting any pages outside of what will be the finished, bound book.
•
Inserting any pages that physically split the cover.
•
Specifying media of different sizes in one job. The media size selection for New Page Range and New Insert is
limited to the same size as the body signature.
Note: Copiers/printers that support half-Z-fold insertion allow media sizes two times the size of the body signature.
Add a cover
In Booklet Maker, you can add a cover to Saddle booklets and specify media for the cover.
For Saddle booklets only, Booklet Maker includes two cover options, either pre-printed or inline, for which you can
specify media. You can specify additional options for an inline cover. If your copier/printer is equipped with an
advanced finisher, such as a Perfect binder, see Printing, which is part of the user documentation set, for additional
cover options.
1
In the Layout > Booklet tab of the printer driver or Command WorkStation Job Properties, select Saddle for
Booklet Type and select a binding edge.
2
Specify the settings for Paper Size and Page Alignment for the body of the booklet.
Fiery Command WorkStation
Booklet Maker
245