System information

Specify Mixed Media settings in Booklet Maker
The Mixed Media viewer is displayed when 1-up perfect binding is selected for the booklet type.
Before you begin
Not all copiers/printers support 1-up perfect binding. If 1-up perfect binding is not supported, the option is not
displayed in the Booklet Type menu.
1
Select your job in Command WorkStation Job Center and open Job Properties.
2
Select Booklet in the Layout tab.
3
Choose 1-up Perfect Binding for the Booklet Type.
4
Choose the Binding edge.
5
Specify Body Paper Size and Cover Paper Size.
Note: Define Cover is not available as a Mixed Media choice in Booklet Maker. Cover definitions are created
using the standard Booklet Maker options.
6
Specify cover settings and any other settings as required.
7
Scroll down to the Mixed Media viewer and specify settings using the following controls:
• Pages tab - Click to display layout of booklet organized by document pages of document and to show
relationship to sheets.
• Sheets tab - Click to display layout of booklet organized by sheets and to show relationship to pages.
• Chapter Start Page(s) field - Type page numbers that you designate as chapter starts, with commas in
between. Chapter start pages are designated in viewer by a marker. Implicit blanks are inserted as needed. The
graphic below shows the chapter start marker and the implicit blank inserted after page 10.
• New Page Range - Click icon or button to type page numbers and then apply media settings to specified
page range.
• New Insert - Click the icon or button to insert a blank page at specific location and apply media settings to
insert.
• Edit - Click the icon or button to modify Page Range or New Insert media settings.
• Delete - Click the icon or button to delete Page Range or New Insert settings.
Fiery Command WorkStation
Booklet Maker
243