System information

4 Final printed result of Fig. 3
5 Aligned at the center with gutter
6 Final printed result of Fig. 5
Note: As you increase the gutter, the page content may be clipped if it reaches the edge of the sheet or the non-
imageable of the paper.
Creep compensation
Creep occurs in booklets with saddle binding or nested saddle binding printed on heavy media, or with a large
number of pages.
As the sheets are folded to create signatures (folded sheets that form the pages of a booklet), each fold causes a small
incremental shift in the location of the page content. The result is that the outer margins become narrower toward
the center of the booklet when the booklet is trimmed. The page content may be clipped or finish up printed too
close to the outer edge.
1 Creep
Mixed Media with 1-up perfect binding
You can specify Mixed Media settings in Booklet Maker only for 1-up perfect binding jobs. The Mixed Media
enhancement integrates a Mixed Media dialog and viewer into the Booklet Maker window.
The Mixed Media viewer presents the actual pagination of the final product, providing a real-time representation of
the selections made in the Mixed Media dialog. You can view the layout of jobs as either pages or as sheets.
In Mixed Media for Booklet Maker 1-up Perfect binding, you can specify:
•
Chapter starts - When a chapter start is designated in a duplex job, implicit blanks are inserted.
•
Page ranges and media for the page ranges.
•
Blank inserts and media for the inserts - Blank inserts specified by the user are explicit blanks. Explicit and
implicit blanks have different designations in the Mixed Media viewer.
Note: Tab insert and cover definition settings can not be specified in Booklet Maker Mixed Media.
When you use Mixed Media in Booklet Maker, it is disabled in the Media tab. Selections made in Booklet Maker will
be displayed subsequently in the Media tab and in Fiery Compose.
Fiery Command WorkStation
Booklet Maker
242