System information

1 Document size > one-half paper size
2 Pages aligned at the center, Shrink to fit Off
3 Final printed result
Page alignment and gutters
A gutter is an additional margin designed to allow space for binding or other finishing options (any after-printing
process, such as folding, stapling, or binding).
In the context of Booklet Maker, the Align pages option defines the initial position of page content (At the center
or At the spine), which can then be further adjusted by increasing the gutter value. The Increase gutter by
option controls the distance (in millimeters or inches) between facing pages in your booklet.
Note: The value specified for gutter does not change the page margins or layout defined in your original document.
The gutter is an extra margin intended to allow space for binding.
For the supported range of gutter values for your copier/printer, see Printing, which is part of the user
documentation set.
Aligned At the spine with gutter
When pages are aligned at the spine, the distance of the page content from the spine equals one-half of the gutter
value.
The following illustration shows the initial alignment At the spine, the final printed result without a gutter, and
then the final printed result when a gutter is added:
Fiery Command WorkStation
Booklet Maker
240