System information

Document size in relation to paper size Scale factor
If document size is greater than (>) one-half paper size Shrink to fit
Note: The Shrink to fit option only reduces or scales down the document page size. Shrink to fit does not scale
up or enlarge.
Shrink to fit On
Booklet Maker automatically scales document pages to fit on one-half the selected Paper size.
For example, a 13x19 in. document is scaled down to fit one-half of an 11x17 in. sheet of paper (one-half = 8.5x11
in.):
1 Document size - 13x9 in.
2 Paper size - 11x17 in. paper size (one-half = 8.5x11 in.)
3 Result - 13x19 in. document scalled to fit one-half paper size (8.5x11 in.)
Booklet Maker can impose differing or non-standard sizes.
For example, an A4 document is scaled down to fit Letter-size paper, which equals 5.5x8.5 in (one-half of an 8.5x11
in./Letter-size sheet of paper):
1
1
1 Document size - A4 (210x297 mm)
2 Paper size - 8.5x11 in. paper size (one-half = 5.5x8.5 in.)
3 Result - A4 document scaled to fit one-half paper size (5.5x8.5 in.)
Shrink to fit Off
If Shrink to fit is Off, the pages of your document print at 100%. Any page content that extends beyond one-half of
the selected paper size is clipped.
In some cases, clipping may be your intent. For example, if your document includes printer’s marks that extend the
document size beyond one-half the paper size, turn Shrink to fit off so that the content prints at 100%, otherwise
the entire page (including the printer's marks) is scaled down to fit within the specified paper size.
Fiery Command WorkStation
Booklet Maker
236