System information

Shrink document page to fit a selected paper size
Scale down your document pages to fit a particular paper size, by selecting the desired size from the Paper size menu.
Booklet Maker automatically shrinks document pages to fit the selected paper size, preserving the aspect ratio of
your original document.
For example, if your document size is 8.5x11 in. and you select 8.5x11 in. from the Paper size menu, the document
pages are scaled down to fit two 5.5x8.5 in. side-by-side pages. The illustration below shows the document size
(input) on the left, and the paper size (the output) on the right:
8
1
1
1 11 in.
2 8.5 in.
3 8.5 in.
4 11 in.
Or, if your document size is A4 (297x210 mm) and you select A4 from the Paper size menu, the document pages are
scaled down to fit two 210x148.5 mm side-by-side pages. The illustration below shows the document size (input) on
the left, and the paper size (the output) on the right:
1
8
1
1 297 mm
2 210 mm
3 210 mm
4 297 mm
Note: The Shrink to fit option only reduces or scales down the document page size. Shrink to fit does not scale up or
enlarge. For more information, see Shrink to fit option on page 235.
Shrink to fit option
By default, Booklet Maker is designed to scale down the pages of your document to fit the paper size you select, while
preserving the aspect ratio of your original document.
Based on your document size and the paper size you select, Booklet Maker automatically calculates the scale factor
as follows:
Document size in relation to paper size Scale factor
If document size is less than or equal (<) to one-half paper size 100%
Fiery Command WorkStation
Booklet Maker
235