System information

Note: The size defined in your application's formatting menu may differ from the size defined in your application’s
Print Setup (or Page Setup) dialog box. The size that is relevant to Booklet Maker is defined in your application's
Print Setup (or Page Setup) dialog box.
Edge feed
Edge feed is the side of the paper that first enters the copier/printer. The feed direction (short-edge feed or long-edge
feed) is associated with certain paper sizes.
When you select a Document size in Print Setup (or Page Setup), it is not necessary to consider the edge feed
associated with the paper size you select. However, the finisher may require edge feed in a certain direction. In
Booklet Maker, paper sizes with feed direction that are not supported by the finisher are dimmed in the list of
available sizes.
Same as document size
Select this option to keep your document page size the same as in your original file. You must select a paper size that
is at least twice the size of your document page.
For example, an 8.5x11 in. document prints on an 11x17 in. sheet of paper. The document size (the input) is shown
on the left, the paper size (output) is shown on the right in the illustration below:
1 8 1
1 11 in.
2 8.5 in.
3 11 in.
4 17 in.
Or an A4-size document (297x210 mm) prints on A3 paper (297x420 mm). The document size (the input) is shown
on the left, the paper size (output) is shown on the right in the illustration below::
1
8 1
1 297 mm
2 210 mm
3 297 mm
4 420 mm
Note: The above examples illustrate paper sizes within the same series (A4 to A3) or standard (Letter to Tabloid).
Booklet Maker can also impose from one series to another (for example, A4 to Letter). For more information, see
Page alignment on page 237.
Fiery Command WorkStation
Booklet Maker
234