System information

Apply color edits through a preset in ImageViewer
1
In the Color Adjust pane, select the preset in the Preset list.
2
Click File > Save.
The preset is applied to the current job.
Apply color edits through a preset in Job Properties
1
In Command WorkStation Job Center, select a held job and click Actions > Properties.
2
Click the Color tab, select the preset in the Curves option, and click OK.
3
With the same job selected, click Actions > Process and Hold.
The color edits of the preset are applied to the processed job.
Note: After the job is processed, the color edits are incorporated in the job and no longer appear as edits in
ImageViewer.
Delete a preset
1
In the Color Adjust pane, select the preset in the Preset list.
The preset is applied to the image.
2
Click Preset > Delete, and click Yes to confirm.
The preset is removed from the list and from the image.
Apply color curve from Curve2/Curve3 file
For a color job, you can import a CMYK response curve that was created in CHROMiX Curve2 or Curve3 (G7
calibration software) and exported as a text file. When you import the curve in ImageViewer, it is applied to the
current page, replacing the existing response curve.
1
Select File > Import > Import Curve.
2
Locate and select the file that contains the curve.
3
Click Open.
Apply gray response curve edits
For a black-and-white job, you can save the edited gray response curve to a file on your computer and then apply the
same edits to a different black-and-white job.
The gray response curve is applied to all pages of a job.
Save gray response curve
1
Select File > Save Curve to File.
2
Type a name for the file.
3
Browse to the location where you want to save the file and save it.
Fiery Command WorkStation
Graphic arts tools
222