System information

Consumables
Consumables are limited resources such as paper, toner or ink, and staples that are used (or "consumed") by the
copier/printer to print jobs.
Information about consumables is available in:
•
The Servers list, in the Consumables section immediately below the name of the Fiery Server. Click the arrow to
expand the section, if needed.
•
Device Center > General > General Info > Consumables.
The Consumables section in both the Servers list and Device Center includes information about available paper
trays, paper levels, and current toner or ink levels. From Device Center, you can also find additional information
about waste toner, fuser oil, and staples. To view informaton about a tray, you can:
•
Double-click the tray.
•
Select the tray and click the arrow.
If the Fiery Servers supports tray association, you can assign media entries in Paper Catalog to specific copier/printer
trays.
Server information
The Server Information tab, which is the second tab located in the lower-left corner, provides a snapshot of
information for the selected Fiery Server.
The tab displays general information, such as the RAM allocated to the Fiery Server system software and hard disk
usage for different kinds of jobs.
To view a detailed and complete list of information, choose Device Center > General > General Info.
Error and status messages
The Servers list provides information about the status of the Fiery Server and error messages about on the copier/
printer.
Status messages
Status messages may be about the Fiery Server or copier/printer. The messages are as follows:
Idle Fiery Server or copier/printer is idle.
Busy Fiery Server is processing a job.
Printing Fiery Server is printing a job.
Canceling Fiery Server is canceling a job.
Sleep Copier/printer is in Sleep mode.
Low Power Copier/printer is in Low Power mode.
Calibration Copier/printer is performing calibration.
Maintenance Required Scheduled copier/printer maintenance is required.
Warming Up Copier/printerr is warming up after waking from sleep or low power mode.
Toner Near Empty The specified toner is almost empty. Time to order new toner.
Fiery Command WorkStation
Adding and connecting a Fiery server
20