System information

You can assign media to a tray in a number of ways, but the media entry must match the paper attributes that are
loaded in that tray. Paper Catalog filters the entries shown for each tray by the paper attributes reported from the
Fiery Server.
Clicking the arrow to the right of each tray listed opens the Tray Information window.
•
To open this window, see Assign media to a tray on page 197.
•
To customize this window, see Change the column display2 on page 201.
You can also view the media supply in a tray.
•
See Monitor media status in a tray on page 200.
Tray association display
Tray association is displayed in:
•
Consumables tab
•
Paper Catalog window
•
Paper Catalog list in Job Properties Media tab
In the Consumables tab in Command WorkStation, all trays installed on the copier/printer are listed with the size of
the media loaded displayed.
If a media entry from Paper Catalog has been associated with a specific tray, that tray displays the name of the media.
If no media from the Paper Catalog has been associated, the tray displays as "Unassigned."
Note: When a Paper Catalog entry is assigned to a tray, any selection made for Input Tray for that media in Job
Properties will be ignored.
You can assign media to a tray in a number of ways, but the media entry must match the paper attributes that are
loaded in that tray. Paper Catalog filters the entries shown for each tray by the paper attributes reported from the
Fiery Server.
Clicking the arrow to the right of each tray listed opens the Tray Information window.
•
To open this window, see Assign media to a tray on page 197.
•
To customize this window, see Change the column display2 on page 201.
You can also view the media supply in a tray.
•
See Monitor media status in a tray on page 200.
Assign media to a tray
Use the tray association feature to assign media from the Paper Catalog to the trays installed on the copier/printer. If
the smart media feature is turned on in Paper Catalog Settings, you can perform automatic tray association.
Assign media to a tray from the Paper Catalog window
In Paper Catalog, you can associate media with a tray by right-clicking or by dragging and dropping.
1
Select Paper Catalog in Device Center > Resources.
Fiery Command WorkStation
Managing server resources
197