System information

Stock type Conversion factor
Index bristol 1.81
Tagboard 1.63
Blanks 2.28
Printing bristol 2.19
Wedding bristol 2.19
Blotter 3.08
Label 1.48
Newsprint 1.63
Tray association
Tray association allows you to assign a Paper Catalog media entry to a copier/printer tray. Use this feature to allow
the copier/printer to automatically pull specific Paper Catalog assigned media for a job that uses a particular Paper
Catalog entry.
Note: Tray association is only supported if Paper Catalog is supported.
You can use the tray association feature to assign media from the Paper Catalog to the trays installed on the copier/
printer.
You can also use smart media to perform automatic tray association—for example, in a print shop, where the copier/
printer is configured with the same paper in the tray more than 90 percent of the time.
Tray association display
Tray association is displayed in:
•
Consumables tab
•
Paper Catalog window
•
Paper Catalog list in Job Properties Media tab
In the Consumables tab in Command WorkStation, all trays installed on the copier/printer are listed with the size of
the media loaded displayed.
If a media entry from Paper Catalog has been associated with a specific tray, that tray displays the name of the media.
If no media from the Paper Catalog has been associated, the tray displays as "Unassigned."
Note: When a Paper Catalog entry is assigned to a tray, any selection made for Input Tray for that media in Job
Properties will be ignored.
Fiery Command WorkStation
Managing server resources
196