System information

Labels Adhesive label stock, such as a sheet of peel-off labels.
Letterhead Cut sheets of opaque media that contain a pre-printed letterhead.
Multi-Part Form Media designed for use as a multi-layer form. Individual layers of the form
are detached from one another and may be drawn from separate paper trays.
It is more likely that the layers are pre-collated. These media tend to be
referred to as NCR - No Carbon Required.
Photographic Cut sheets of opaque media designed to support photographic-quality
images.
Pre Cut Tabs Media with two or more tabs that extend along an edge of the sheet.
Stationery Cut sheets of opaque media. Generic paper falls under this category.
Tab Stock Media with one or more tabs. Can be either Full Cut Tabs or Pre Cut Tabs,
or refer to media with enough thickness and stiffness to be used as a tab.
The media may or may not have tabs.
For example, the metric weight of a 50lb bond stock is calculated as follows:
Basis Weight x Conversion Factor = 50 x 3.76 = 188gsm
US Basic Size
The US Basic Size attribute indicates the type of media stock (measured in inches), as defined by US industry
standards.
The US basic size is the established size (in inches) of paper stocks upon which the basis weight for the stock is
calculated in the United States. The basic size of most paper stocks is also recognized by buyers and sellers as one
size that has common use requirements. Choose from the following options:
Paper stock US basic size
Bond 17" x 22"
Ledger 17" x 22"
Thin (manifold, onion skin) 17” x 22”
Duplicator 17” x 22”
Safety 17” x 22”
Uncoated book 25” x 38”
Coated book 25” x 38”
Text book 25” x 38”
Cover Papers 20” x 26”
Fiery Command WorkStation
Managing server resources
194