System information

Grain Direction Direction of paper grain on the media used. Choose from the following
options:
•
Short - Grain runs parallel to the short edge of the media, as defined by
Size.
•
Long - Grain runs parallel to the long edge of the media, as defined by
Size.
Hole Type Pattern of punched holes (if any) on the media used.
Imageable Sides Specifies which side(s) of the media support print imaging.
Media Color Profile Default color profile applied to both the front and back sides of the media.
This attribute can be overridden by specifying a different color profile in Job
Properties. When you specify an individual profile for either Front Color
Profile or Back Color Profile, the Media Color Profile columns in the Paper
Catalog window display the individual profiles.
Media Unit on page 191
Media Weight The PPD setting for weight of the media used, measured in grams per
square meter (gsm) or pounds (lbs). The similar JDF setting is Weight on
page 195.
Name Descriptive name for the catalog entry, to describe the media to load in the
trays, such as 11" x 17" Hammermill 105 gsm. Type the desired name into
this field.
Opacity on page 192
Opacity Level % The media's percentage of opacity. 0% represents full transparency, and
100% represents full opacity.
Paper Color The PPD setting for the color of the paper to be used. JDF settings for color
of media include Color and Custom Color Name.
Paper Type The PPD setting that includes categories that are similar to those in the JDF
Type, Type Details on page 193, and Texture on page 192 settings.
Pre-Printed When the check box is selected, the media contains pre-printed content (for
example, stationery paper with a pre-printed letterhead). When the check
box is cleared, the media is not pre-printed.
Printing Technology Choose from the available printing technologies.
Product ID Part number, item code, article number, or other identifier for the media
used, as defined manually by the print operator, or by a Management
Information System (MIS).
Punched Paper The PPD setting for possible hole-punch combinations. The similar JDF
setting is Hole Type.
Set Count Defines the number of pieces in a grouped media set. For example, tab stock
with five pre-cut tabs has a Set Count of "5".
Size Width and height dimensions of the media used. You can select a size or
enter a custom paper size in inches, millimeters, or points.
For information about specific Paper Size options, see Printing, which is part of the user documentation set.
Texture on page 192
Thickness Thickness of the media used, measured in microns.
Fiery Command WorkStation
Managing server resources
190