System information

Reset an image
Applying the No Correction preset resets images to their original state. For PDF files, all adjustments to the
selected images are removed. For PostScript files, all adjustments to the selected images made since the last time you
saved the file are removed.
1
Select the image.
2
Do one of the following:
• Under Adjustments, click Reset.
• In the Presets list, choose No Correction.
Open a large job
In some cases, a large job may not open or display correctly if Image Enhance Visual Editor (IEVE) is installed on
the Fiery Server that also has a FACI kit installed. Increasing the hard disk space available on the Fiery Server may
correct this problem.
1
Close IEVE and Command WorkStation.
2
Create a folder for the temporary files on the E: drive. Name the folder Temp.
3
On the Windows Start menu, click Control Panel.
4
In Control Panel, double-click System.
5
In the System Properties dialog box, click the Advanced tab. Click Environment Variables.
6
In the Environment Variables dialog box, at the top, select the TEMP variable. Click Edit.
7
In the Edit User Variable dialog box, enter the path to the Temp folder you created in step 2. Click OK.
8
Repeat steps 6-7 for the TMP variable. Use the same path as in step 7.
Note: The next time you open a large job, IEVE will use this temporary folder and the job should render correctly.
Adjust tone
Tone settings affect the tone levels (contrast and brightness) as well as the highlights and shadows of an image. If
details in highlight or shadow areas are hard to see because of exposure or lighting problems, you can use
Highlights and Shadows settings to make them more visible.
Adjust tone automatically
You can apply the Automatic preset to adjust tone automatically.
•
Click Automatic in the Presets menu.
Fiery Command WorkStation
Managing color
164