System information

Delete a custom calibration setting
You can delete a custom calibration setting if it is not associated with the default output profile. You cannot delete a
factory-supplied calibration setting.
You must have Administrator privileges to delete a custom calibration setting.
1
In Command Workstation Device Center, click the General tab, click Tools, and then click Manage under
Calibrate.
2
Select the calibration setting in the list and click Delete.
Customize Image Enhance settings
The default settings for the Apply Image Enhancement print option automatically optimize the exposure, color,
shadows, highlights, and sharpness of each specified image in a job. If the default settings do not provide satisfactory
results, you can customize the Apply Image Enhancement settings for properties such as brightness, contrast, and
red-eye correction.
The Apply Image Enhancement print option, when selected for a job, applies photo finishing enhancement to
color images on specified pages or sheets of a job when it is printed. This option affects only photographic images,
not graphics such as logos or charts.
The Apply Image Enhancement print option is located in the Image tab of the printer drivers and Job Properties.
For more information about this print option, see Printing, which is part of the user documentation set.
1
In Device Center, click the Workflows tab and click Image Enhance.
2
Click Edit.
3
Click Custom Settings, modify the settings, and then click OK.
• Exposure - Enables the Dynamic Correction, Contrast, and Brightness controls.
If Dynamic Correction is selected, the Fiery Server analyzes each image and automatically applies the correct
contrast and brightness, using separate values for contrast and brightness. Dynamic correction attempts to fill
the full dark to light range.
You can also specify contrast and brightness adjustments manually. If Dynamic Correction is selected, any
manual adjustments that you make to the Contrast and Brightness controls are applied in addition to
automatic contrast and brightness adjustments. If Dynamic Correction is not selected, Contrast and
Brightness manual adjustments are applied to the original image.
• Color - Enables the Cast Correction, Tone, and Saturation controls.
If Cast Correction is selected, the Fiery Server analyzes each image and automatically corrects the color
balance of the image.
You can also specify tone and saturation adjustments manually. If Cast Correction is selected, manual
adjustments that you make are applied in addition to the Cast Correction automatic adjustments. Color
balance adjustments are applied, and then any Tone and Saturation adjustments are applied. If Cast
Correction is not selected, Tone and Saturation manual adjustments are applied to the original image.
• Shadows & Highlights - Enables the Auto Correction, Shadows, and Highlights controls.
If Auto Correction is selected, the Fiery Server analyzes each image and attempts to correct for shadows that
are too dark and highlights that are too light. You can specify Shadows and Highlights enhancements
manually if you clear the Auto Correction option first.
Fiery Command WorkStation
Managing color
160