System information

Delete custom calibration sets
When you delete a custom calibration set, the output profile associated with it is not deleted. The profile is
automatically associated with another calibration set.
1
In Calibrator, under Calibration Set, click the list and select Manage.
2
Select the calibration set, click Delete, and then click OK.
A message indicates that the output profile associated with the deleted calibration set will be associated with a
different calibration set after the deletion.
If you do not need the output profile after deleting the calibration set (for example, because the profile is just a
copy of another output profile that was created when you created the calibration set), you can delete the profile.
3
To close the window, click Cancel.
Important: Clicking Cancel does not undo the deletion. The calibration set is deleted when you click OK.
Restore default measurements
You can restore the factory default measurements to all calibration sets or only certain calibration sets.
1
Do one of the following:
• If you want to restore the default measurements to all calibration sets, select Apply to All Calibration Sets
• If you want to restore the default measurements to particular calibration sets, deselect Apply to All
Calibration Sets, click Customize, and select the calibration sets..
2
Click Restore Device.
3
Click OK to confirm.
Calibration (System 10 and later)
The output of a printer changes over time and under different printing conditions. Calibration helps to ensure
consistent and reliable output.
Calibration measures current output densities and then adjusts print jobs to achieve the desired output densities (the
calibration target or calibration goal). The calibration applied to a job is associated with the particular output profile
that is used for the job.
Changing calibration may affect all jobs for all users, so try to limit the number of people authorized to perform
calibration.
Only one user at a time can use Calibrator. If you try to calibrate when another user is using Calibrator, an error
message appears.
Command WorkStation offers two versions of Calibrator, for different versions of Fiery Server software. You can
find the Fiery System version in Command WorkStation, in Device Center on the General Info tab under the
General tab. For System 10 and later, you can access this Help by clicking the Help button in the Calibrator
windows
Fiery Command WorkStation
Managing color
147