System information

Import profiles
You can import a source profile (RGB or CMYK), an output profile, or a device link profile to the Fiery Server.
Before you begin
Note: On Windows, a profile must have a file name extension of .icc or .icm to be selectable for importing. On Mac
OS, a profile must have a file type of “profile.”
1
In Device Center, click the Resources tab, click Profiles and then click Import.
2
Select a folder in the Location list.
• Manage Custom Locations - Allows you to add or delete folders designated as custom locations. Custom
locations are displayed in the Location list.
• All - Selects all folders in the Location list.
• OS-installed folders are defined as follows.
Operating
System
Folder Name
Displayed
Path to Folder
Windows System WINDOWS\system32\spool\drivers\color
Other All other paths used by Windows to install profiles
Mac OS X System /System/Library/ColorSync/Profiles
Computer /Library/ColorSync/Profiles
User ~/Library/ColorSync/Profiles
Other All other paths used by Mac OS to install profiles
Profiles in the selected folder are displayed and can be selected. Subfolders are included when you select an OS-
installed folder. Subfolders are not included when you select a custom location.
3
Select a profile.
4
For a CMYK profile, select a setting for Import profile as.
• CMYK Source and Simulation - To use the profile as a CMYK source profile. Select if you want the Fiery
Server to simulate another printer or press standard.
• Output - To use the profile as an output profile. Select for a custom profile of your copier/printer.
5
Click Import.
6
If the Profile Settings dialog box is displayed, select settings for this profile and click OK.
You set the profile settings when the imported profile is a new profile (not a replacement of a profile already on
the Fiery Server).
Fiery Command WorkStation
Managing color
135