System information
Reorder jobs
You can reorder the jobs in the Printing or Processing queue.
•
Do one of the following:
• From Job Center, select a job in the Printing or Processing queue and drag the file either up or down in the job
list.
• Select a job in the Processing or Printing queue and select Actions > Move Up or Actions > Move Down.
• If supported on your Fiery Server, select a job in the Processing or Printing queue and select Actions > Print
Next to allow the Fiery Server to process the job as soon as the current job is finished processing.
• If supported on your Fiery Server, select a job in the Processing or Printing queue and select Actions > Rush
Print to allow the Fiery Server to interrupt a currently printing job to print a Rush Print job. The Fiery Server
waits until the currently finishing set of the job is completed before printing the Rush Print job. After the Rush
Print job is finished, the Fiery Server resumes printing the interrupted job.
Send jobs to another Fiery server
With the Send to command, you can transfer jobs to another connected Fiery Server.
When you transfer a job to an identical Fiery Server, raster data is transferred. When you transfer a job to a different
Fiery Server, only the source file is transferred, not the actual raster data. When transferring a job, review and re-
specify, if necessary, all job properties, because non-identical Fiery Servers may behave differently.
1
Do one of the following:
• Select any held job in the Job Center and drag it to another Fiery Server in the Servers list.
• Select any held job in the Job Center and click Actions > Send to.
• Right-click any held job in the Job Center and select Send to.
2
Select a Fiery Server.
3
Click Yes to confirm the transfer of the job.
Archive jobs
Archive jobs internally to the Fiery Server hard disk or externally to removable media or networked drives.
After you archive a job, it appears in the Archived tab of Job Center.
1
Do one of the following:
• Select any job in the Printed or Held list and drag it to the Archive lists.
Note: You cannot drag jobs from a computer to the Archive list. You can only drag jobs to the Archive list if
they are already on the Fiery Server
• Select any held job in the Job Center and click Actions > Archive.
• Right-click any held job in the Job Center and click Archive.
Fiery Command WorkStation
Managing jobs
116