System information
4
Specify the Timeout interval as desired.
The time-out interval defines how long the Fiery Server should wait for the next job in the sequential run, before
timing out and considering the run complete.
Setting the time-out for a long period may result in the Fiery Server locking the system from processing other
files after the last file in the sequential run was spooled.
5
Select the Publish Sequential Print Queue check box if you want the queue to be available to all users on the
network.
6
After you have changed the setting for an option, do one of the following:
• On FS100/100 Pro or later: Click Undo or Apply.
• On FS150/150 Pro or later: Click Cancel or Save.
7
Restart the Fiery Server.
Use Quick Doc Merge
Quick Doc Merge allows you to merge multiple files or jobs together so they can be printed as a single job on the
Fiery Server.
Documents to be merged must be either PostScript or PDF format. When merged into one job on the Fiery Server,
the job becomes VDP format.
A Quick Doc Merge job overwrites all Job Properties settings for the individual documents to the Fiery Server default
settings. Therefore, you must set Job Properties after you combine the separate documents into the single Quick Doc
Merge job.
1
Do one of the following:
• From Job Center, right-click a job in the Held list and select Merge Jobs.
• Click Actions > Merge Jobs.
Note: Only pre-processed jobs can be merged together.
2
Click Add from Network to browse and select PostScript or PDF files to import.
3
Click Add from Fiery to display a list of all PostScript and PDF files in the Hold queue on the Fiery Server.
4
When the jobs you selected are listed, click Move Up or Move Down to change the order in which they are
printed. Click Remove to remove a job.
5
If desired, select Define each document as a separate finished chapter.
Selecting this option applies finishing options for the job to each chapter. For example, if this option is selected
and the merged job has the job property Stapled, each of the merged jobs is stapled individually. If the option is
deselected, the entire merged job is stapled together.
6
Type a name for the merged document in the Save QDM Job as field.
7
Click Save.
The job is created and listed in the Held list.
Fiery Command WorkStation
Printing
112