System information
Remove raster data from a job
You can remove the raster data from a job if necessary (for example, to change a job property that requires
reprocessing).
Raster data is generated and linked with a job that is processed or processed and held.
This icon indicates a processed job with raster data.
This icon indicates a spooled job without raster data.
1
Select the processed or held job in the Held list.
2
Click Actions > Remove Raster.
Printing methods
You can shift page content by using the Tray Alignment feature, verify that the copier/printer is performing correctly
by using the Sample Print feature during a long print job, and check output by using the Proof Print feature.
Use Tray Alignment
The Tray Alignment feature shifts and rotates content on the page to correct misalignment problems caused by the
imperfections of the paper tray.
The correction produces even margins which are ideal for registration on duplex (2-sided) printing.
Note: You must be an Administrator to use Tray Alignment.
1
In the Main window, select the connected Fiery Server.
2
Do one of the following:
• Select Server > Align Tray.
• In Device Center, select General > Tools > Tray Alignment.
3
In the Tray Alignment window, specify the tray you want to align from the Tray list.
4
Specify the paper size loaded in the tray from the Paper Size list.
Note: The size you specify must match the actual paper size. For example, if you specify Letter size paper but
load Legal size paper in the tray, the tray alignment effort is invalidated. Perform a new tray alignment for each
combination of tray and paper size.
5
Select Align for duplex to print a duplex page, or clear this check box to print a single-sided page.
6
Click Continue to print the tray alignment test page.
7
When the page has printed, follow the instructions on the alignment page.
8
In the Adjustment Settings area, enter the value where the fold crosses each of the three scales marked A, B, and
C, for Side 1. If you chose to align for duplex printing, enter the values for the three scales on Side 2 of the page.
Click Apply.
9
After you enter all of the alignment values, click Print Verification Page to print the new alignment page.
10
Click Close.
Fiery Command WorkStation
Printing
107