Installation guide

4
4-44 Performing Setup from the Control Panel
Convert Paper Sizes
No Letter/11x17->A4/A3 A4/A3->Letter/11x17 [No]
Specify whether to convert paper sizes in documents automatically to the default paper
sizes specified. For example, if you select Letter/11x17->A4/A3, a letter size document
is automatically printed on A4 paper.
NOTE: This option works in conjunction with the Default Paper Sizes option. For
example, if Convert Paper Sizes is set to Letter/11
x17->A4/A3, and Default Paper Sizes
is set to US, then jobs are printed A4/A3 size. This also includes Fiery system pages
such as the Start Page, Test Page, and Job Log.
Page Order
Forward/Reverse [Forward]
Select Forward if you want to print the pages of your job from first to last. Select
Reverse if you want to print the pages of your job from last to first.
Page Order
From N to 1/From 1 to N [From N to 1]
Specify the page order for printed output. Forward (From 1 to N) prints pages in the
order received, so the last page is on the top of the stack and the first page is on the
bottom. Reverse (From N to 1) prints jobs in reverse order, so that the first page is on
the top of the stack and the last page is on the bottom.
Color Mode
CMYK/Grayscale [CMYK]
Specify whether to print color (CMYK) or Grayscale images to the Fiery by default.
CMYK gives you full color prints. Select CMYK as the Color Mode before performing
calibration on the Fiery. Grayscale converts all colors into shades of gray.
Print to PS Error
Yes/No [No]
Specify whether the Fiery should print the available portion of a print job when it
encounters a PostScript error. Select Yes to print the portion of the job that was
processed before the error occurred; select No to cancel the print job entirely when a
PostScript error is encountered. Leave this option at No unless you encounter printing
problems.
EX12
EX2000d
EX12