Installation guide

4
4-3 Fiery Control Panel
Activity light
The activity light indicates the current Fiery activity. If the light is:
Buttons
Solid red An error has occurred, causing the Fiery to be disabled.
Flashing red An error has occurred, causing printing to be disabled, but
the Fiery is capable of processing.
Solid green The Fiery is idle.
Flashing green The Fiery is processing or printing a job, or communicating
with a remote computer.
No light The Fiery is off or starting up.
Line selection
buttons
Use these buttons to select the command displayed on the
corresponding line of the display window. When a button is
active, a special character (>) appears in the display window
next to the button.
Up and Down
arrow buttons
Use these buttons to scroll to different screens in
multi-screen lists, select Setup options from a list of available
options, and scroll through alphanumeric characters.
Menu button Press this button to view other screens. Under normal
operation, the Control Panel displays the Info, RIP, or Print
Status screen with information about the status of the Fiery.
If you press the Menu button, the Functions menu is
displayed and you can perform additional operations (see
page 4-6). If a job is processing or printing, press the Menu
button to cycle among the active screens.
Power button Press this button to turn the Fiery on and off.
Reset button Press this button to restart the Fiery after you have selected
Shut Down System from the Shut Down menu.