Installation guide

3-9 About Setup

Local Setup from the Fiery

You can also perform Setup locally at the Fiery, using Server Setup, a Windows NT

Control Panel. Some of the settings you specify in Server Setup conﬁgure the Server

process (such as print job defaults), while some conﬁgure the Windows NT

Workstation environment (such as system date and time). Depending on the settings

you change in Server Setup, you must restart Windows NT 4.0 before your changes

take effect.

Setup options for local Setup are divided into three groups:

Network server setup requirements

For Token Ring, Novell, and Windows NT (using TCP/IP) networks, you must

conﬁgure the network servers for printing to the Fiery before you conﬁgure Fiery

network settings in Setup. For chapter references to information about network server

setup, see the diagrams in Chapter 1.

To conﬁgure network settings in Setup, you must have a live network connection, so

the Fiery can query the network for zones, servers, and server-based queues.

Whenever the conﬁguration of the Fiery, the copier/printer, or the network itself

changes at your site, you can alter individual settings to correspond to the changed

environment. Changing network or port settings may require that you make changes

to other Setup options, as well.

General Setup System settings, passwords, and Job Log options

Network Setup All the active network systems that will transmit print jobs to

the Fiery

Printer Setup Fiery print connections to be made available to users, and

color defaults for jobs