Installation guide

A
A-2 Token Ring Network Option
Back view of the Fiery with the Token Ring option installed
Turn off the Fiery before connecting it to any network device.
NOTE: Do not attach cable to both Token Ring connectors.
TO CONNECT CABLE TO THE FIERY
1. Turn off the Fiery.
2. Connect the cable from the Token Ring MAU to the Fiery Token Ring card.
Configure the NetWare, Windows NT, or UNIX server to print to the Fiery (see the
following two sections), then proceed to page 4-1 for Fiery Setup.
Token Ring connectors
!