Installation guide

4
4-46 Performing Setup from the Control Panel
Halftone Angle Magenta
0–360 [15]
Specify the Magenta halftone screen angle. Choose the angle to correctly register the
halftone shape.
Halftone Angle Yellow
0–360 [15]
Specify the Yellow halftone screen angle. Choose the angle to correctly register the
halftone shape.
Halftone Angle Black
0–360 [15]
Specify the Black halftone screen angle. Choose the angle to correctly register the
halftone shape.
Halftone Dot Shape
Round/Square/Default/Line/Ellipse [Round]
Choose the shape that will create the pattern for your Halftone Screen.
Enable Bypass Tray as default
Yes/No [No]
Select Yes to specify that jobs should be printed from the bypass tray. Use this option to
enable printing from the bypass tray when tray selection is not otherwise available in
the interface, such as when printing from the command line (lpd or DOS). In general,
select No when the interface permits tray selection on a job-by-job basis.
Save Changes
Yes/No [Yes]
Select Yes to activate any changes made in PS Setup; select No to return to the main
Setup menu without making any changes.
EX12