Technical data

3
3-39 PCL Setup options
TO ACCESS PCL SETUP OPTIONS:
In the list of options that follows, default values, where applicable, appear in square
brackets.
Paper Size
Letter/Legal/A5/A4... [Letter]
This option sets the size of the print area on the paper, not the size of the paper itself.
Default Orientation
Portrait/Landscape [Portrait]
This option determines whether the text or image will be oriented along the short edge
of the paper (portrait) or along the long edge of the paper (landscape).
Form Length
5-128 [60]
This option sets the number of lines to be printed per page.
Font Size (pt)
4.0-999.75 [12.00]
When the number selected in Font Number represents a proportionally spaced scalable
font, the Font Size option appears, allowing you to determine the point size (height) of
the default font.
Font Pitch (char/in)
0.44-99.99 [10.00]
When the number selected in Font Number represents a fixed pitch scalable font, the
Pitch option appears, allowing you to determine the width of scalable type. Pitch is
measured by characters per inch, so 10-pitch type fits ten characters per linear inch.
Symbol Set
ASCII/Roman-8/ECMA-94 L1/PC-8... [Roman-8]
This option lets you choose the symbol set that best matches the needs of users
printing to the Fiery.
1. In the main Setup menu, choose PCL Setup.
2. Enter the options appropriate to the printing requirements at the site.
3. When you have finished, save changes.
PS Setup
PCL Setup
Color Setup
Job Log Setup
Setup