Technical data

3
3-37 PostScript Setup options
Convert Paper Sizes
No Letter/11x17->A4/A3 A4/A3->Letter/11x17 [No]
Specify whether to convert paper sizes in documents automatically to the default paper
sizes specified. For example, if you select Letter/11x17->A4/A3, a letter size document
is automatically printed on A4 paper. If you select No, the Fiery prints the document
only if it finds a media source in the size specified by the file.
NOTE: This option works in conjunction with the Default Paper Sizes option. For
example, if Convert Paper Sizes is set to Letter/11x17 -> A4/A3, and Default Paper
Sizes is set to US, then jobs are printed A4/A3 size. This also includes Fiery system
pages such as the Start Page, Test Page, and Job Log.
Page Order
Forward/Reverse [Forward]
Specify the page order for printed output. Forward prints pages in the order received,
so the last page is on the top of the stack and the first page is on the bottom. Reverse
prints jobs in reverse order, so that the first page is on the top of the stack and the last
page is on the bottom.
Color Mode
CMYK/Grayscale [CMYK]
Specify whether to print color (CMYK) or Grayscale images to the Fiery by default.
CMYK gives you full color prints. Select CMYK as the Color Mode before performing
calibration on the Fiery. Grayscale converts all colors into shades of gray.
Print to PS Error
Yes/No [No]
Specify whether the Fiery should print the available portion of a print job when it
encounters a PostScript error. Select Yes to print the portion of the job that was
processed before the error occurred; select No to cancel the print job entirely when a
PostScript error is encountered. Leave this option at No unless you encounter printing
problems.
Allow Courier Substitution
Yes/No [Yes]
Specify whether to substitute Courier for fonts that are unavailable when you
download files to the Fiery, or when you print a document for which you do not have
the corresponding printer font. If this option is set to No, jobs with fonts that are not