Technical data

3
3-22 Performing Setup from the Control Panel
PServer Setup options
Network Setup
Service Setup
PServer Setup
Enable PServer
Yes/No [No]
Select Yes if you have a Novell network connected to the Fiery.
Choose NDS Setup if your network uses NetWare 4.x in native mode. Choose
Bindery Setup if your network uses NetWare 3.x or uses NetWare 4.x in bindery
emulation mode.
If your network uses both NDS and Bindery, set up NDS first. Setting up NDS
after Bindery will overwrite Bindery Setup.
If your network uses both NDS and Bindery, and uses NetWare 4.x servers in
bindery emulation, note that the Fiery cannot service NDS and bindery emulation
servers on the same NDS tree.
Network Setup
Service Setup
PServer Setup
NDS Setup
Before entering NDS settings, be sure the Fiery is connected to the network and
you have already configured an NDS directory tree with a Printer, a Print Server,
and one or more Print Queue objects for Fiery jobs (see page 5-4). To perform
NDS Setup you may need permission to browse the NDS tree. If access to the Print
Server is restricted, you need a login password.
The main objective of NDS Setup is to specify the Print Server object. In addition,
you can indicate the location of the Fiery print queues.
The terms NetWare server, Novell server, and IPX server are in common use and are
used here interchangeably to mean the server on an IPX network running Novell
NetWare networking software.
Enable NDS
Yes/No [No]
Select Yes if the NetWare servers you will use to print to the Fiery are running
NetWare 4.x in native mode.
Exit PServer Setup
NDS Setup
Bindery Setup
Polling Interval
PServer Setup