Technical data

1
1-3 Fiery on the network
Summary of Fiery network installation
At each workstation that will print to the Fiery:
• Install the appropriate printer files and connect
to one or more queues.
• For computers that will use them, install Fiery
utilities and an Internet browser.
• Verify the Fiery in the list of printers and run a
test print.
Fiery available on the network
Network server
UNIX Mac OS Windows
Fiery
Fiery
Prepare a network node. Connect the Fiery to the
copier and to the network. If you use a computer
running the Command WorkStation software,
connect it to the network.
Configure UNIX, Windows NT 4.0 and IPX (Novell)
servers to specify Fiery print queues and Fiery
users.
Install PostScript printer files on the server.
No special configuration of AppleShare servers is
required.
On the Fiery Control Panel, configure at least the
Server Setup, Network Setup, and Printer Setup.
From the Control Panel, WebSetup, or the Command
WorkStation, configure the remaining Setups.
Calibrate the Fiery.
SERVER CONFIGURATION
CONNECTION
CLIENT SETUP
FIERY SETUP