Technical data

5
5-12 Setting up Network Servers
TO CONNECT AND PRINT TO THE FIERY SHARED BY A WINDOWS NT 4.0
SERVER:
• For Windows NT 4.0 Workstation clients, before printing, connect to the print server
computer and select the Fiery. Right-click and choose the Open command.
When prompted, click Yes to have Windows set up the printer.
After clients have selected the printer, they can choose it from the Print Setup, Page
Setup or Print dialog box of their application. Clients can change printing options for
their own job, but printer properties are grayed and not available for changing. When a
client chooses Print, the job is transmitted to the Windows NT 4.0 print server, and
from there to the selected print connection on the Fiery. The job is listed in the Print
Manager on the client workstation, and the administrator can track it in the Fiery
window in the Print Manager on the Windows NT 4.0 print server.
Configuring the Fiery and clients for Fiery WebTools
The Fiery WebTools provide access to many Fiery functions via the Internet (or
intranet), providing additional flexibility in remote management. You can access the
Fiery WebTools from a Windows 95/98, Windows NT 4.0, or Mac OS computer.
NOTE: Fiery WebSetup is supported for Windows 95/98 and Windows NT 4.0
computers only.
TO SET UP FIERY WEBTOOLS ON THE FIERY:
1. In Fiery Network Setup, enable TCP/IP.
2. Set a valid, unique IP Address for the Fiery, and then set the subnet mask. Set a
gateway address if necessary.
3. Enable Web Services.
4. In Fiery Printer Setup, confirm the Print Queue
is published.