Manualshelf

Technical data

ManualsBrandsElectronics For Imaging ManualsComputer equipmentFiery X12
121122123124125126127128129130
4
4-37 Exiting Setup
CMYK Simulation Method—Specify the simulation method to be used.
RGB Separation—This option defines how the Fiery processes RGB jobs. Select
Output for RGB jobs that you print to the final output device. Select Simulation to
simulate an output device that is not the device to which you are printing.
Output Profile—Specify the output profile to use for printing. Additional profiles can
be created and downloaded to the Fiery with ColorWise Pro Tools.
Pure Black Text/Graphics—Specify whether to optimize black text and line art. This
option also minimizes toner use for documents containing both color and black-only
pages.
When this option is on, black text and line art are printed with black toner only. When
this option is off, black text and line art are printed using all four colors of toner.
Black Overprint—When this option is on, black text overprints on colored
backgrounds. With this option is off, black text knocks out color backgrounds. In
general, this option should be on.
Spot Color Matching—When this option is on, the Fiery uses an internal lookup table
to print the best equivalents of PANTONE colors. When this option is off,
PANTONE colors are printed using the CMYK values defined in the originating
applications.
Exiting Setup
When you have finished specifying Setup options, click OK and close the Setup dialog
box. You are notified that the Server must be restarted for the new settings to take
effect and given the choice to reboot now or later. If the Command WorkStation is
running, the connection to the Server is lost and you must log in again when the
Server has finished restarting.
If you changed the network configuration or other settings affecting Windows NT 4.0
Workstation, you must reboot Windows NT 4.0 for those changes to take effect.
After you have completed Setup and rebooted the Fiery for the first time, install user
software for printing on remote workstations as described in Getting Started. To
confirm the network connection and your Setup, print a test job from a remote
workstation.