Technical data

4
4-33 Printer Setup options
Convert Paper Sizes—Specify whether to convert paper sizes in documents
automatically to the default paper sizes specified. For example, if you select Letter/
11x17->A4/A3
, a letter size job is automatically printed on A4 paper. If you select No,
the Fiery prints the job only if it finds a media source in the size specified by the job.
Print Cover Page—Specify whether the Fiery prints a cover (job summary) page at the
end of each print job. If this option is set to Yes, each print job is followed by a page
containing the name of the user who sent the job, the document name, the server
name, the time the job was printed, the number of pages printed, and the status of the
job. If a PostScript error occurs and the Print to PS Error option is set to Yes, the Cover
Page lists the PostScript error message instead of the job status.
Allow Courier Substitution—Specify whether to substitute Courier for unavailable
fonts. When this option is off, jobs requiring fonts not available on the Fiery hard
driver generate a PostScript error and do not print. This setting does not apply to PDF
files; font substitution occurs automatically for PDF files.
Print to PS Error—Specify whether the Fiery should print the available portion of a
print job when it encounters a PostScript error. In general, this option should be set to
No.
• When this option is set to No, printing of the entire job is canceled when a
PostScript error occurs, but the processed portion of the job and the PostScript error
information are stored on the Fiery. You can view the job and the error information
from the job management tools.
• When this option is set to Yes, the portion of the job processed before the error
occurred is printed.
Enable Bypass Tray as default—Specify whether jobs should be printed from the
bypass tray. Use this option to enable printing from the bypass tray when tray selection
is not otherwise available in the interface, such as when printing from the command
line (lpd or DOS). In general, turn off this option when the interface permits tray
selection on a job-by-job basis.
Face-Down Printing—Specify whether to have printed output exit the copier face-
down.