Technical data

4
4-32 Setting up the Fiery from a Windows Computer
PS (PostScript) Setup
The options in the PS Setup menu in local Setup are located on the Paper Setup tab in
remote Setup.
NOTE: In the following illustrations, “Device name” represents the model of the copier
connected to the Fiery, which is DC12.
Color Mode—Specify whether to print color (CMYK) or Grayscale images to the Fiery
by default. CMYK gives you full color prints. Select CMYK as the Color Mode before
performing calibration on the Fiery. Grayscale converts all colors into shades of gray.
Page Order—Specify the page order for printed output. Forward prints pages in the
order received, so that the last page is on the top of the stack and the first page is on the
bottom. Reverse prints jobs in reverse order, so the first page is on the top of the stack
and the last page is on the bottom.
Default Paper Sizes—Specify whether to print on US paper sizes (for example, letter,
legal, tabloid), or Metric paper sizes (for example, A4 and A3) by default. When no
page size is defined within a PostScript file, jobs are printed on letter-size paper if you
select US, or A4 paper if you select Metric.