Technical data

4
4-28 Setting up the Fiery from a Windows Computer
Point and Print Driver—With Windows printing, users can download printer drivers
directly from the Fiery. Users can download only one type of driver (PostScript or
PCL), depending on the selection you make for this option. In remote Setup, this
option is not available.
The remaining options are found only in remote Setup. To change them with local
Setup, use the Network Control Panel in Windows NT 4.0.
Server Name—The server name is the name that will appear on the network. It can,
but does not have to, be the same name as the server name assigned to the Fiery (see
page 4-4).
Comment—You can enter information about the printer, up to 15 characters. These
comments are listed in the Properties of the Fiery in Network Neighborhood.
Lowercase letters are allowed in this field.
Domain or Workgroup—Enter the workgroup or domain where the Fiery should
appear.
Ethernet WINS Server—Enter the IP address of the Ethernet WINS name server.
Token Ring WINS Server—Enter the IP address of the Token Ring WINS name server.
Broadcasts from SMB devices cannot be routed beyond their original network segment
without a WINS name server. Setting up the WINS name server is outside the scope of
this manual. To find out if a name server is available, contact your network
administrator.