Installation guide

4
4-20 Performing Setup from the Control Panel
Domain Name
Enter the domain name of your DNS server.
Host name
Default server name
Enter the host name of the Fiery EX2101. By default, the host name is Server Name
you enter in Server Setup.
Choose Exit Setup from the main Setup menu when you have finished making Setup
changes. The Fiery EX2101 will restart. All changes will be saved on restart.
IPX/SPX Setup options
For protocols other than IPX/SPX, the frame type is automatically enabled and does
not require setup, as follows:
To specify the frame types the Fiery EX2101 uses for IPX/SPX protocols, choose
IPX/SPX Setup from the Protocol Setup menu. You must choose at least one frame
type to enable IPX/SPX protocols. The Fiery EX2101 supports the following frame
types for IPX/SPX:
•For Ethernet—Ethernet 802.2, Ethernet 802.3, Ethernet II, and Ethernet SNAP
With this protocol And these printing services
This frame type is
automatically enabled
AppleTalk PAP (Printer Access Protocol) Ethernet SNAP
TCP/IP with Ethernet LPD (Line Printer Daemon) Ethernet II
Exit Protocol Setup
AppleTalk Setup
TCP/IP Setup
IPX/SPX Setup
Protocol Setup